International Journal of Advanced Engineering Application

Fabrication, Mechanical Characterisation and Tribological Behaviour of Aluminium 6061 Hybrid Metal Matrix Composites Reinforced with Silicon Carbide and Graphite Particulates

Author(s):Rajesh Kumar Pandey, Sudhanshu Mishra, Priyanka Sharma

Affiliation: Department of Mechanical Engineering, Bundelkhand Institute of Engineering and Technology, Jhansi, Uttar Pradesh, India Department of Production Engineering, Maulana Azad National Institute of Technology, Bhopal, Madhya Pradesh, India

Page No: 111-119

Volume issue & Publishing Year: Volume 3, Issue 5, May 2026

Journal: International Journal of Advanced Engineering Application (IJAEA)

ISSN NO: 3048-6807

DOI: https://doi.org/10.5281/zenodo.20286530

Download PDF Cite this article

Abstract:
Aluminium-based metal matrix composites (AMMCs) have gained significant attention in the aerospace, automotive and defence sectors owing to their superior specific strength, stiffness and wear resistance compared with unreinforced aluminium alloys. The present study investigates the fabrication, mechanical behaviour and tribological performance of Al 6061 hybrid composites reinforced with varying weight percentages of silicon carbide (SiC) particulates (5 wt% and 10 wt%) and a hybrid combination of SiC (5 wt%) with graphite (Gr, 3 wt%). Composites were fabricated using liquid-state stir casting followed by permanent mould casting. Microstructural characterisation was carried out using optical microscopy and scanning electron microscopy (SEM) to assess particle distribution, porosity and interfacial bonding. Mechanical properties evaluated include density, Brinell and Rockwell hardness, ultimate tensile strength (UTS), yield strength, percentage elongation, and Charpy impact energy. Tribological behaviour was assessed on a pin-on-disc tribometer under dry sliding conditions at varying normal loads (10–30 N) and sliding speeds (1.0–2.0 m/s) over a sliding distance of 500–1000 m. Results indicate that incorporation of 10 wt% SiC increases UTS by 26.1% and reduces wear rate by 49.7% relative to the unreinforced Al 6061 matrix. The hybrid Al-SiC-Gr composite demonstrates improved machinability and a balanced tribological performance, suggesting suitability for applications demanding combined wear resistance and lubricity. Statistical analysis using Analysis of Variance (ANOVA) confirms that normal load exerts the most significant influence on wear rate, followed by sliding speed and sliding distance.

Keywords: aluminium metal matrix composite, silicon carbide, graphite, stir casting, wear rate, tribology, ANOVA, SEM, UTS, hybrid composite

Reference:

• [1] Alaneme, K.K. & Bodunrin, M.O. (2013). Corrosion behaviour of alumina reinforced aluminium (6063) metal matrix composites. Journal of Minerals and Materials Characterization and Engineering, 11(12), 1153–1164.
• [2] Bhatt, A., Bahl, S., Kumar, S., Kumar, S., & Sehgal, S. (2021). Mechanical and tribological behaviour of Al 6061–SiC–Gr hybrid composites: A review and experimental study. Materials Today: Proceedings, 43, 2466–2476.
• [3] Chawla, N. & Chawla, K.K. (2006). Metal Matrix Composites. Springer Science & Business Media, New York.
• [4] Dwivedi, D.K. (2010). Adhesive wear behaviour of cast hypereutectic Al–Si alloys: Overview. Materials and Design, 31(5), 2517–2531.
• [5] Ghosh, S.K. & Saha, P. (2011). Crack and wear behaviour of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process. Materials and Design, 32(1), 139–145.
• [6] Miracle, D.B. (2005). Metal matrix composites – from science to technological significance. Composites Science and Technology, 65(15–16), 2526–2540.
• [7] Natarajan, N., Krishnaraj, V., & Davim, J.P. (2013). Metal Matrix Composites: Synthesis, Wear Characteristics, Machining. Springer, Berlin.
• [8] Prasad, S.V. & Asthana, R. (2004). Aluminum metal–matrix composites for automotive applications: tribological considerations. Tribology Letters, 17(3), 445–453.
• [9] Rao, R.N. & Das, S. (2011). Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials and Design, 32(3), 1066–1071.
• [10] Sahin, Y. (2003). Wear behaviour of aluminium alloy and its composites reinforced by SiC particles using statistical analysis. Materials and Design, 24(2), 95–103.
• [11] Suresh, S., Shenbaga Vinayaga Moorthi, N., Vettivel, S.C., & Selvakumar, N. (2014). Mechanical behaviour and wear prediction of stir cast Al–TiB₂ composites using response surface methodology. Materials and Design, 59, 383–396.
• [12] Taguchi, G. (1986). Introduction to Quality Engineering. Asian Productivity Organization, Tokyo.
• [13] Umanath, K., Selvamani, S.T., & Palanikumar, K. (2011). Friction and wear behaviour of Al6061 alloy (SiC + Al₂O₃) hybrid composites. International Journal of Engineering Science and Technology, 3(7), 5441–5451.
• [14] Veeresh Kumar, G.B., Rao, C.S.P., & Selvaraj, N. (2011). Mechanical and tribological behaviour of particulate reinforced aluminium metal matrix composites: A review. Journal of Minerals and Materials Characterization and Engineering, 10(1), 59–91.
• [15] Yılmaz, O. & Buytoz, S. (2001). Abrasive wear of Al₂O₃-reinforced aluminium-based MMCs. Composites Science and Technology, 61(16), 2381–2392.