International Journal of Advanced Engineering Application

Adsorption Isotherm, Kinetics, Column Dynamics and Techno-Economic Assessment of Activated Carbon–ZnO Nanocomposite for Defluoridation of Groundwater in Fluorosis

Author(s):Gopal Reddy, Arun Shankar Pillai

Affiliation: Department of Civil and Environmental Engineering, National Institute of Technology Warangal, Warangal, Telangana, India

Page No: 15-19

Volume issue & Publishing Year: Volume 3, Issue 4, 2026/04/04

Journal: International Journal of Advanced Engineering Application (IJAEA)

ISSN NO: 3048-6807

DOI: https://doi.org/10.5281/zenodo.19453096

Download PDF Cite this article

Article Indexing:

Abstract:
Fluoride contamination of groundwater above the WHO guideline value of 1.5 mg/L affects an estimated 66 million people across 19 Indian states, with Rajasthan, Andhra Pradesh, Telangana, and Gujarat recording the highest endemic fluorosis prevalence. The scale of this public health crisis — manifesting as dental fluorosis in children and skeletal fluorosis in adults with prolonged high-fluoride exposure — demands decentralised, low-cost, and operationally robust treatment solutions appropriate for rural villages where piped water infrastructure is absent and chemical dosing-based defluoridation technologies that require trained operators are impractical. This paper presents a comprehensive characterisation of an Activated Carbon-ZnO nanocomposite (AC-ZnO) synthesised from agricultural waste Prosopis juliflora wood as the carbon precursor and ZnO nanoparticles precipitated in situ, targeting fluoride removal from groundwater in the concentration range 2-15 mg/L. Batch adsorption studies establish isotherm parameters (Langmuir qmax=145 mg/g, KL=1.8 L/mg; Freundlich KF=22, n=0.41), kinetic parameters (pseudo-second-order model best fit, k₂=0.009 g/mg·min), thermodynamic parameters (ΔG°=−18.4 kJ/mol confirming spontaneous adsorption, ΔH°=+32.6 kJ/mol confirming endothermic process), and the effect of pH, co-ions, and initial concentration. Fixed-bed column studies at three bed heights (5, 10, 15 cm) are modelled using Thomas, Adams-Bohart, and Yan models. A techno-economic comparison against five competing defluoridation technologies positions AC-ZnO as the optimal choice for village-scale groundwater treatment on cost-effectiveness grounds, with a 90-day pilot plant trial at Nalgonda district confirming operational stability

Keywords: fluoride removal, adsorption, activated carbon, ZnO nanocomposite, Langmuir isotherm, groundwater, defluoridation, India, fluorosis, column study, Thomas model, techno-economic

Reference:

• [1] Bhatnagar, A., Kumar, E., & Sillanpää, M. (2011). Fluoride removal from water by adsorption — A review. Chemical Engineering Journal, 171(3), 811-840.
• [2] Bhave, P. P., & Shah, B. A. (2012). Removal of fluoride from drinking water using nanoparticles. Desalination, 304, 30-35.
• [3] Hamamoto, S., et al. (2013). Evaluating fluoride adsorption by ZnO-based materials. Water Research, 47(10), 3484-3492.
• [4] Iyer, R., & Pillai, A. S. (2023). AC-ZnO nanocomposite for groundwater defluoridation: Batch and column studies. Chemical Engineering Journal, 476, 146618.
• [5] Mohapatra, M., et al. (2009). Review of fluoride removal from drinking water. Journal of Environmental Management, 91(1), 67-77.
• [6] Poulsen, N., & Bjerring, M. (2022). Surface complexation of fluoride on ZnO: XPS and FTIR study. Langmuir, 38(14), 4312-4322.
• [7] Reddy, G., & Iyer, R. (2022). Column performance of agricultural waste-derived adsorbent for defluoridation. Environmental Science and Pollution Research, 29(22), 33142-33156.
• [8] Teutli-Sequeira, A., et al. (2020). A review of fluoride removal methods from drinking water. Engineering, 12(11), 779-802.
• [9] WHO. (2022). Guidelines for Drinking-Water Quality (4th ed., incorporating first and second addenda). World Health Organization, Geneva.
• [10] Zhang, C., et al. (2017). Enhanced fluoride removal by La-modified ZnO. Journal of Hazardous Materials, 332, 178-186.